Why your mix sounds different on every speaker
Your mix sounds different on every speaker because no two speakers play the same range of notes at the same level, and every room adds its own changes. A small speaker drops the lowest notes, a big one plays them, and a room makes some louder and others weaker.
That part is normal, and you can't change it. What you can change is how your mix reacts to it. This guide shows you how to tell what each speaker does from what your mix does, so your track sounds like itself wherever it plays.
What changes from one speaker to the next
Play one song on five systems and you hear five versions. Three things cause most of the difference:
- How low it goes. Phone and laptop speakers barely play the lowest notes. Studio monitors and car stereos play them, often with extra.
- Its own tone. Every speaker is tuned a little brighter, darker or warmer than the next. Many headphones and car stereos add bass on purpose.
- The space around it. The walls bounce some notes back louder and swallow others, so the same speaker sounds different in a small bedroom and a big living room.
So the sound changes on every system. Released songs change too. The difference is that they still sound like themselves, because their balance sits close to the middle of all those systems.
That's the real goal. Not a mix that sounds perfect on one speaker, but a mix whose balance holds up on all of them.
The trap: fixing your mix for one speaker
Most producers mix on one system, test on another and fix what they hear there.
The bass booms in the car, so they turn it down. Now it's thin on headphones, so they turn it back up. The vocal is buried on the laptop, so they push it. Now it's too loud on the monitors.
Each fix is right for one speaker and wrong for the others. You end up going in loops, because you are tuning your mix to the speaker instead of to the music.
The way out is a fixed point that doesn't change: a released song you love, played next to your mix on every system.
The test: one song you love, every speaker you own
This test takes about 30 minutes and tells you what to fix.
- Pick a reference. A released song in the same style as your track, one that sounds great to you.
- Pick your systems. Use what you have: studio monitors or speakers, headphones, earbuds, your phone speaker, a laptop, the car. Four or five is plenty.
- Match the volume. On each system, play the released song, then your mix, at the same volume by ear. A louder track always sounds better, so this step matters.
- Write one line per system. Only what's different from the reference: "bass bigger", "vocal quieter", "hi-hats sharper".
Now read your notes side by side.
- A difference on one system only: that's the speaker or the room. Leave it.
- The same difference on most systems: that's your mix. Fix that.
If your bass is bigger than the reference on four systems out of five, your bass is too big, whatever your studio speakers say. If it's bigger only in the car, the car is doing it, and the released song gets the same treatment there.
The full way to compare with a song you love is in our guide on how to use reference tracks for mixing.
The three fixes most mixes need
When producers run this test, the same three notes keep coming up. They match the three things a pro hears separately in every mix.
The lows change the most (frequency balance)
Bass and kick change more than anything else between systems, because speakers and rooms differ most in the lows. A small room can hide bass at the spot where you sit, so you add too much.
Check the lows alone, in your studio:
- Put a low-pass filter (it removes everything above the point you set) at about 120 Hz on your master.
- Switch between your mix and the reference, at the same level.
- Turn the bass and kick up or down until the two match. Do it on headphones too, because your room can't change what headphones play.
Turn the filter off before you export. If it booms in the car only, read why a mix sounds boomy in the car.
Quiet parts vanish (dynamics)
On a small speaker or across a room, soft parts sink: reverb, background vocals, quiet melodies. If a part matters, it needs to sit close enough to the loud parts to survive.
Set these levels on your quietest system, like the laptop or phone, against the reference. Then check on headphones that they aren't too loud there.
Wide parts thin out (stereo image)
Phones and many small speakers play close to mono, with left and right added together. Some width tricks lose level or go hollow when that happens.
Switch your master to mono for a moment. Any part that drops or goes hollow needs less widening. Keep the kick, bass, snare and lead vocal in the centre. More on this in why a mix sounds bad on a phone.
Get an expert's ears on your track
Try our community, Music Production Mastery, free for 7 days. You get a 30-minute call with one of our experts, every premium plugin and app, and our weekly live masterclass.
Start my free weekJoin free now, and stay if you love it.
A routine that makes every mix hold up
You don't need better speakers to fix this. You need a routine you repeat:
- Mix on one main system, the one you hear best on.
- Keep a reference loaded in your project from the start, at the same volume as your mix.
- Run the test on your other systems when the mix feels close, and write one line per system.
- Fix only what shows up on most systems, then run the test once more.
After a few tracks, something changes. You start hearing the lows, the quiet parts and the width as three separate things, on any speaker. That's when your mix stops sounding different everywhere, and starts sounding like you meant it on all of them.